Easy Methods To Care For Timber Home Windows

Easy Methods To Care For Timber Home Windows

The wood has natural properties that may assist it withstand the elements but to make it final even longer we apply a 'color harmonising' end within the factory, which accommodates a preservative. We then apply a micro-porous protective stain or paint finish.

General Cleaning – carry out frequently at the least twice a yr
For common cleaning use a soft fabric and water with soap or washing-up liquid
To remove grease marks, use washing-up liquid with little or no water then rinse with clean water
Don't use glass cleaner on frames
Don't use kitchen / toilet cleaners
Wood is just not indestructible. Upkeep of the coated finish is essential, not only to keep the window or door looking good, but with the proper upkeep your products ought to last even longer than their guarantees.

To Recoat
It's endorsed that the surface coating is inspected yearly and if required it is best to re-coat the wood with micro-porous stain or paint.

Here’s how:

Clean the window or door as above and let it dry fully
Use a fine grade of wet and dry silicon carbide abrasive paper to lightly rub down the existing paint or stain end (do not try to rub through the prevailing coat. This train is meant only to remove any grease and grime and provide a smooth surface)
Remove all dust and debris with a wet fabric, taking care to keep away from inhalation of the mud
Permit to dry totally
Apply the micro-porous end with a brush, taking care not to overload the brush or get the finish on the seals or gaskets
Only use micro-porous paint or stain. Avoid non-micro-porous finishes comparable to yacht varnish as they need stripping and renewing more often. And you should follow the instructions on the container carefully.
Scratches and Chips
Damaged timber should be re-painted or re-stained instantly
First, put together the damaged space by removing all surface damage with a light abrasive following the line of the grain
Remove all mud and debris with a wet cloth, taking care to avoid inhaling the dust
Where necessary, a timber filler may be used to repair the damage and provide a smooth surface for reapplying the end
Re-apply the end to the damaged area as described above
Failure to treat scratches and chips will invalidate the product guarantee.

Knots, Grain and Movement
Wood is a natural product and options equivalent to knots and variations in grain look do occur. This is just not a fault but a part of the natural great thing about our timber product. As a natural product some degree of movement in terms of enlargement or contraction might be expected..

If you loved this article and you would like to get more facts with regards to Traditional Timber Windows kindly take a look at our web page.