Momentary Floor Protection - A Product Guide

Momentary Floor Protection - A Product Guide

Your flooring need special protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors so to make informed choices on one of the best product to make use of on your needs.

Types of Protection Packaging:

Ground protection products are commonly packaged as either:

(1) Products by the roll: These embrace common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different rigid protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as four toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can typically go away adhesive residue when removed. Frequent paper protection products embody:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that's inexpensive but does not afford any impact protection and might easily tear

· Scrim paper may incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to strengthen the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nevertheless they are additionally too thin to offer a lot impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper can even rip simply so it not usually recommended for use

· Corrugated cardboard rolls or sheets can also be used to protect flooring. Corrugate provides impact protection however it shouldn't be coated with a water-resistant finish and ought to be kept dry always so that it doesn't disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero as much as 3.5 mils in thickness. They trap any moisture from escaping so they shouldn't be used on any floors that are curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don't supply any impact protection and are normally rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled supplies making them a poor alternative in sustainable protection. Protection films are available in a wide range of adhesion "tack". Hard surface protection films can have a lower tack and shade than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers not like plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the usual dimension of four toes by 8 ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/four inch to three/four inch thick. Each products provide impact protection on a variety of flooring types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nonetheless they're bulky to carry and store. These wood sheets should be used on top of a softer protection such as a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and could be harder to cut to size than different protection types.